World Association of News Publishers


Suomalainen Lehtipaino’s bold move switching to DCOS pays off, month-by-month

Suomalainen Lehtipaino’s bold move switching to DCOS pays off, month-by-month

Article ID:

22904

Kinna, May 7th, 2020 – In 2008 Suomalainen Lehtipaino, based in Kajaani in northern Finland, invested in a new printing press. A seven tower and two folders Tensor T400BE press with DCOS drive and control system was installed and substantially increased the color and pagination capacity compared to the Solna press it replaced. The press was originally equipped with Inventor Spray Dampening and Perretta Remote Inking and Register System.

Jussi Talvi at Suomalainen Lehtipaino at the DCOS desk.

In 2016 it was announced that Suomalainen Lehtipaino invests in additional automation as the Perretta closed-loop register system was replaced by a closed-loop Color, Register and Cut-off system from Dutch company QI Press Controls. The customer’s expectations were to increase the quality and obtain savings in ink and waste paper. The system was installed in the end of 2016.

“Starting at the end of 2018 we were in contact with Marja and her team discussing future retrofit needs and we could see that the efficiency and savings was not at a level we normally expect on a press with Closed-loop Color control. Start-up waste was almost doubled compared to equivalent DCOS installations. This encouraged us to investigate if there is a financial incitement to replace the new QI system with a DCOS system”, says Marcus Juselius, DCOS Agent in Finland.

A detailed ROI study was made and presented. This was followed up with two reference visits to demonstrate the DCOS Inspection system to highlight the differences. In late summer 2019 Suomalainen Lehtipaino decided to place the order with DCOS to replace the Closed-loop Inspection System.

The target for the investment was for the start-up waste to be almost halved, reduced by 47,5% with DCOS Technology.

“We were thrilled about this opportunity. We know our technology is unrivaled when it comes to ROI and waste savings, we have seen this trend for years, but it’s always hard to compare different systems on different type of jobs, presses and pressrooms. Here we finally got a chance to compare apple-to-apple. Replacing the old system with the new and monitor the result.”, says Mattias Andersson, CEO and DCOS.

The QI Press control system was dismantled as the DCOS system was installed and commissioned in December 2019. The first full month waste report for January showed a 39% start-up waste reduction from the previous year and the start-up waste has continued to decline since.

Marja Niemi, Production Manager Suomalainen Lehtipaino says; “I have to admit it was not easy to make the decision to replace the system we installed in 2016, but the DCOS reference visits were very convincing and we felt confident the ROI was there. Today I´m very pleased to see the promises come through, resulting in savings for us. Additionally, our operators give me very positive feedback on a fully automatic and user-friendly system”.

This is DCOS second Closed-Loop Inspection System installation in Finland.

About DCOS Inspection System
DCOS Inspection Systems is a range of in-house developed camera based systems for the printing industry. The systems automate a majority of the traditionally manual quality adjustments made in the printing process. This in turn increases productivity and cost effectiveness as waste, start-up time, use of consumables and manning can be greatly reduced. At the same time a high and consistent quality is guaranteed.

DCOS Inspection System measures solid ink micro marks. Offline densitometric measurement of ink solid is proven in the industry for decades, it simple and stable. DCOS has reengineered the concept and developed an online high-speed solution adaptable to any press. This technology is optimized for best performance, repeatability and effectiveness. This is proven at installation across the globe.

About DCOS
DCOS offers custom-designed automated solutions with a focus on user-friendliness, efficiency and reliability – the aim is to maximize the productivity of the customers.

DCOS offers a new approach in operation and control systems, operator interfaces, production follow-up and camera-based inspection systems for new and printing press installations, including retrofitting of existing ones. The company has printing press customers across the world and operates a strong service organization based on a network of carefully selected and skilled agents and partners.
(https://dcos.se)


Attachments

Author

Michael Spinner-Just's picture

Michael Spinner-Just

Date

2020-05-11 08:39

Press releases fresh from the industry as they reach us. Read more ...

The World Printers Forum (WPF) is an organisation of newspaper printers and suppliers within WAN-IFRA. It promotes the power of print and the sustainability of print production. Read more ...

Publishers and printers around the world have come to expect WAN-IFRA to provide the most up-to-date know-how about production processes, whether it be in prepress, printing, workflow or postpress. Its range of advisory services, trainings, reports and events are unparalleled. Read more ...

WAN-IFRA offers the supplier companies a plethora of platforms to present their valuable products and services to our top-level publishing community, with top-quality exhibitions, events, webinars and workshops, publications, newsletters and more. Read more ...